TONTEN MACHINERY LIMITED
Integrity foothold, innovation and distance. Because of sincerity, so professional. Customer requirements, our pursuit.
Add to Cart
Lithium Battery Recycling Lithium Iron Phosphate Battery Recycle Line
Product Introduction:
The lithium battery recycling production line is mainly for lithium-ion batteries. According to the material characteristics of lithium-ion batteries and combined with actual processes, it mainly separates positive and negative electrode materials and valuable metals through physical crushing, combined with air separation and vibration screening processes, and finally obtains positive and negative electrode materials (lithium cobalt oxide powder or ternary powder, graphite powder), copper, aluminum, diaphragm plastic, nickel strip and other materials.
Working process:
1. TONTEN machinery lithium battery crushing recycling line sends waste lithium batteries to the primary crusher for crushing by the conveyor.
2. The material is sent to the crusher by the conveyor for secondary crushing, and the iron in the material is sorted out by the conveyor and enters the magnetic separator at the same time.
3. It is sent to the air separator by the conveyor, and the diaphragm paper in the positive and negative plates is separated by the fan and cyclone discharger. The separated positive and negative plates are sent to third-level crusher for fine crushing, and the material is crushed to about 20 meshes.
4. It enters cyclone separator through negative pressure system for dust filtration. Materials of different densities are separated by two wind selection layers, and all ultrafine dust enters the pulse dust collector through the negative pressure system.
5. The filtered exhaust gas will continue to be sent to the exhaust gas treatment equipment by the negative pressure system for air purification, so that it can be discharged after meeting the national emission standards.
The recycling of waste lithium batteries is mainly concentrated on the recovery of precious metals cobalt and lithium in the positive electrode. Copper in the negative electrode of waste lithium batteries is an important production raw material widely used. The environmentally friendly physical separation process is adopted to achieve efficient separation and recycling of waste lithium batteries.
Lithium battery recycling machine mainly comprises tfollowing steps: after discharging the recovered waste batteries, crushing, magnetic separation, air separation,crushing,gravity separation, screening and other processes are carried out by mechanical equipment.
Lithium battery recycling line specification:
| Items | LR-500 | LR-800 | LR-1000 |
| Production capacity | 300-500Kg/h | 500-800Kg/h | 1000-1200Kg/h |
| Motor power | 87Kw | 115 Kw | 128 Kw |
| Weight | 3 Ton | 5 Ton | 7 Ton |
| Dimension (m) | 16x5x3.2 | 20x6x5 | 23x6x5.1 |
Customer site:
