TONTEN Industrial Glass Crusher Machine Production Line To Sand 6-25t Per Batch

Glass Bead Produce Machine Glass Crushing Recycling Production Line

Introduction Of Glass Crushing Recycling Production Line:

Glass bead firing furnace uses the principle of flame floating method to feed glass particles into the flame in a certain way. Under the action of the flame, the glass particles soften, melt, bead, cool and solidify to become glass beads. The production equipment for glass microbeads mainly includes bucket elevators, turbine induced draft fans, formed bead cooling and conveying winches, four layer mesh linear vibrating screens, forming rooms with circulating water jackets, forming collection rooms with wide tanks, steel air ducts, steel hot distribution air ducts, hot circulation air chambers, cooling water tanks, circulating water pumps, natural gas hydrodynamic oxygen distribution guns, glass sand feeders, inlet spherical valves, pressure gauges, work inspection and repair platforms, pulse bag dust collectors, water vapor separators, storage silos, production equipment distribution boxes, etc.

Glass Crushing Recycling Production Line Working principle:

Glass sand is fired (using a specially designed firing furnace and natural gas to heat the glass sand and burn irregularly shaped sand into small balls), cooled, screened, weighed, and packaged. The main link in the entire processing process is the firing process. First, ignite natural gas (coking gas) in the furnace and add glass sand when the furnace temperature reaches 800 degrees; When the glass sand is heated, it rises and forms with the flame, then enters the diffusion chamber for cooling and shaping. After being cooled again by a twisting dragon and sieved by a vibrating screen, the packaging is completed. This product belongs to physical deformation. 2. Jingye Wanguangying Menren uses natural gas (coking gas) as the heating fuel,glass crushing recycling production line actually waste utilization

Glass Crushing Recycling Production Line Operation Guide:

1.Check the forward and reverse rotation of the motor;

2.Open the air inlet of the furnace body, start the induced draft fan, evacuate the remaining air from the furnace body, start the circulating water pump after five minutes, and prepare for ignition after the drainage pipe of the furnace body flows smoothly;

3. Open the distribution port of a fire gun and start ignition. First, aim the ignition rod at the distribution port of the fire gun. Slowly open the gas pipeline valve, turn off the ignition rod after ignition (note: do not increase the gas supply first),

4.start the cooling winch, and start both together;

5.Start the vibrating screen;

6.After everything is normal, perform all inspections;

The equipment is normal, the furnace temperature is normal, and the electromagnetic feeder is turned on. Start cutting (note: do not supply too much current at the beginning)

7. Check the quality of the glass beads, slowly add materials, and increase production only when quality is ensured;

8. Ensure that the temperature of the glass beads does not scald the packaging; Only then can it be filled.

Our Service:

Pre-sales service: TONTEN Machinery Limi provide with the prophase plan, process flow design and manufacturer equipment according to your special demand.

Sales service: Send technicians to the jobsite guiding the installation and adjustment, training operators and finishing the check and accept together with you.

After-sales service: To establish long term friendship, we will reg-ularly pay return visit to customers. Supplying technique, building design, instruction, installation and debugging for free.

Lifelong service: 2 years warranty to make sure your machine runs constantly.Always offer lifelong service and provide spare parts for a long term.